Creating an Emerson ceiling fan

!±8± Creating an Emerson ceiling fan

An Emerson ceiling fan is a fan durable and efficient, which made it one of the leaders in fan design and technology. The company was responsible for producing the first electric motor which is powered by alternating current. Emerson was the beginning of hundreds of years of dedicated service. The fans are easy to install and you can do it yourself by following these simple instructions.

What you need

1 ladder

A piece of duct tape

2Screwdrivers

1 utility knife

Cable connectors (the manufacturer)

Procedure

Step 1 - Install the fan

With the manufacturer's instructions, the Emerson-mounted fan without attaching the globes, lighting and blades.

Step 2 - Install the fan

With the main switch, install the fan to be attached to the ceiling with screws. Safe secure and reliable.

Step 3 - Preparation of the surface

Disconnect the cables in the bottom bracketThe staff of the ball in the hook by cutting the ball in the cradle attachment.

Step 4 - Connect the wires

The green ground wire from the support cable is connected to ground of similar color. The ground wire is copper wire nut provided. The white wire should be connected with the white wire from the ceiling box. This method is also with the black wire and the blue bar at the bottom done. Take advantage provided by cable connectorEmerson ceiling fan.

Step 5 - Completing the Connection

Finally, connect the blue wire from the pole to the red wire from the junction box from the ceiling.

Step 6 - Wrap the wire with electrical tape

Check the cables, and tighten the wire nuts ensure a proper connection, then wrap each wire carefully with electrical tape. Gently push the cable connected to the outer box of the ceiling.

Step 7 - Put the Stud

With holesSupport, the threaded bolt into place. Emerson ceiling fan manual will show you the tunnels, if you can not find.

Step 8 - Install ceiling lining

Safe and secure the ceiling panels in the ceiling through the two buttons. The lid must be lifted to the pole and the bracket to the threaded bolts protruding through the cover holes.

Step 9 - Install the rest

You can now use the ball, the fan blades and light bulbs with the followinginstruction manuals.

Step 10 - Restoring the Power

Turn off the main switch and test your newly installed ceiling fan.

You can control the set-up before turning on the device. If in doubt, call an electrician to check the set-up Emerson fan for you. It's worth being cautious when it comes to electrical appliances.